Last updated: November 13, 2026
Home Assistant’s new hardware is not another hub for new gadgets. It is the opposite: a box to bring the stuff you already own into your smart home. Old amplifiers, AV receivers with a serial port, solar inverters, Bluetooth sensors on the other side of the house. The company calls the launch “No device left behind.”
What It Does
| Feature | What you can do |
|---|---|
| Audio out | Analog/digital combo jack plus optical input. Turn an old stereo into a Music Assistant speaker |
| 2× RS-232 serial | Control TVs, AV receivers, climate gear and inverters through existing integrations. RX/TX switches fix swapped cables |
| Bluetooth proxy | Extends Home Assistant Bluetooth to another room with no flashing |
| USB port | Network-attach a Z-Wave adapter, or add a $15 RS-485 adapter for Modbus devices |
| Grove ports | Plug temperature, humidity and other sensors (GPIO and I2C), configured with ESPHome |
| Power and network | PoE, USB power, Ethernet or Wi-Fi. 1–2 W in standby |
Why It Is Interesting
A lot of good equipment has a serial port and no app. Getting it into Home Assistant used to mean a Raspberry Pi with a USB adapter next to the device, or a DIY ESP32 board. The AUX-2 puts that in a finished case that you can power over the network cable.
It also fits a bigger push in Home Assistant: the 2026.11 release added a serial proxy to ESPHome, so any ESPHome device can share a serial port across the network. The AUX-2 is the polished version of that idea.
Open Hardware
The device is unlocked for custom firmware and uses ESPHome for sensors, and Nabu Casa plans to release the PCB and 3D print files. The case is held by four Phillips screws, with no clips or glue, so it is easy to open and repair.
DIY Alternative With an ESP32
If you like building, an ESP32 already covers part of this: it can be a Bluetooth proxy, read sensors and share a serial port with ESPHome. See our best ESP32 boards and how to install ESPHome. What you won’t get easily is the good DAC, PoE and the tidy case.
🛒 What you need
As an Amazon Associate, Arelvox earns from qualifying purchases. This does not change the price you pay.
Frequently Asked Questions
What is the Home Assistant Connect AUX-2?
A small network device from Nabu Casa, the company behind Home Assistant hardware. It adds audio streaming, two RS-232 serial ports, a Bluetooth proxy, Grove sensor ports and a USB port to Home Assistant, over Ethernet or Wi-Fi.
How much does it cost?
$69 in the US and €59 in Europe. It went on sale worldwide on November 11, 2026.
Can I use it as a network Z-Wave or Zigbee adapter?
Z-Wave yes: you can plug a Connect ZWA-2 into it and place it anywhere on your network. Zigbee over the network works but is not officially advertised yet, and Thread over the network is not workable for now.
Is it open source?
It is unlocked for custom firmware, sensor work is done with ESPHome, and Nabu Casa says it will publish the PCB and 3D print files.
Can I build something similar myself?
Partly. An ESP32 with ESPHome can already be a Bluetooth proxy, read sensors and, with Home Assistant 2026.11, share a serial port over the network. The AUX-2 packs all of that with good audio and PoE in one case.