ESP32-S31 Explained: Specs, Wi-Fi 6 and Thread, and Should You Wait for It?

In short: the ESP32-S31 is Espressif’s most capable general-purpose chip yet: 2 RISC-V cores at 320 MHz, Wi-Fi 6 + Bluetooth 5.4 + Thread/Zigbee, Gigabit Ethernet MAC and up to 60 GPIO. Great for hubs and displays, but for simple sensors a classic ESP32 or C3 is still cheaper and better supported.

Espressif started mass production of the ESP32-S31 in July 2026, and dev boards are now trickling out. It combines almost everything from the S3, C6 and H2 families in one chip. Here is what it offers and who should care.

ESP32-S31 Specs

ESP32-S31ESP32-S3ESP32 (classic)
CPU2× RISC-V, 320 MHz, SIMD on one core2× Xtensa LX7, 240 MHz2× Xtensa LX6, 240 MHz
SRAM512 KB512 KB520 KB
Wi-FiWi-Fi 6 (2.4 GHz)Wi-Fi 4Wi-Fi 4
Bluetooth5.4, Classic + LE Audio5.0 LE only4.2 Classic + LE
Thread / ZigbeeYes (802.15.4)NoNo
EthernetGigabit MACNo10/100 MAC
GPIOUp to 604534

It also adds camera and LCD interfaces, up to 14 touch channels, JPEG encoding and decoding, 2D graphics acceleration, two I2S audio controllers and a 40 MHz low-power coprocessor.

What It Is Good For

  • Smart home hubs and bridges: Wi-Fi, Thread, Zigbee and Bluetooth in one chip, plus Ethernet.
  • Matter devices over Wi-Fi or Thread.
  • Touch displays and control panels thanks to the LCD interface and 2D acceleration.
  • Audio projects: Bluetooth LE Audio and Classic, I2S.
  • Edge AI: the SIMD core helps with audio and image processing.

Should You Wait for It?

For a temperature sensor, a relay or a door contact: no. A classic ESP32 or an ESP32-C3 costs a few euros, works with everything and has thousands of tutorials (see ESP32 vs ESP8266 and the best ESP32 boards). For a project that needs Thread, Ethernet, a display and good audio at the same time, the S31 is worth watching.

Before buying, check that the tools you use support it. Espressif supports it in ESP-IDF, with ESP-Matter, ESP-BLE-MESH and ESP-BLE-AUDIO; Arduino and ESPHome support for new chips usually arrives later.

Frequently Asked Questions

What is the ESP32-S31?

A new Espressif chip with two RISC-V cores at up to 320 MHz, Wi-Fi 6, Bluetooth 5.4 (Classic and LE Audio), 802.15.4 for Thread and Zigbee, a Gigabit Ethernet MAC and up to 60 GPIO. Mass production started in July 2026.

Is it better than the ESP32-S3?

On paper, yes: faster cores, Wi-Fi 6, Thread/Zigbee and Ethernet. The S3 has years of libraries, tutorials and cheap boards behind it, so for most projects today it is still the easier choice.

Does the ESP32-S31 work with Arduino and ESPHome?

Espressif supports it in ESP-IDF. Arduino and ESPHome support usually follows a new chip after some months; check the current status before you buy for a specific project.

Can it be a Matter or Thread device?

Yes. It supports Matter over Wi-Fi and over Thread thanks to its 802.15.4 radio.

Where can I buy ESP32-S31 boards?

Espressif sells development boards through its official AliExpress store. More third-party boards are expected over the coming months.

Sources

Leave a Comment